SPDES MS4 Information
According to the federal law commonly known as Stormwater Phase II, permits will be required for stormwater discharges from Municipal Separate Storm Sewer Systems (MS4s) in urbanized areas and for construction activities disturbing one or more acres. To implement the law, the Department has developed two general permits, one for MS4s in urbanized areas and one for construction activities. The permits are part of the State Pollutant Discharge Elimination System (SPDES). Operators of regulated MS4s and operators of construction activities must obtain permit coverage under either an individual SPDES permit or one of the general permits no later than March 10, 2003 or prior to commencement of construction.
Click here for Brochures for Stormwater Best Management Practices.
Click here to view the SPDES General Permit for Stormwater Discharges from Municipal Separate Storm Sewer Systems.
UPDATE: New York State DEC has updated the Notice of Intent for the SPDES General Permit for Stormwater Discharges from Construction Activity to address the Runoff Reduction criteria in the 2010 version of the NYS Stormwater Design Manual. The new Notice of Intent is available as a PDF under “Forms” header on the Stormwater Permit for Construction Activity webpage (http://www.dec.ny.gov/chemical/43133.html).
DEC will not accept the old NOI form after October 1, 2013.
In addition, DEC has developed worksheets to help owners/designers account for runoff reduction techniques and complete the new questions that were added to the Notice of Intent. The worksheets are available as Excel spreadsheets under the “Additional Tools” header on the Construction Stormwater Toolbox webpage (http://www.dec.ny.gov/chemical/8694.html)
(August 2010) New York State DEC has updated the New York State Stormwater Management Design Manual. This manual is a key component of the Phase II State Pollution Discharge Elimination System (SPDES) general permit for stormwater runoff from construction activities. The Chemung County Stormwater Coalition strongly urges designers to begin using this updated version. Click here to view the updated manual.
Contractors, before doing any work or planning of development, please contact the Stormwater Officer in the municipality where the construction activity will be taking place.
Planning to disturb 5 acres or more, click here to learn the facts.
Construction Activity Training Sessions for Contractors and Developers dealing with Stormwater, Erosion and Sediment Control
These approved 4 hour training sessions are required for all companies working under NYSDEC's SPDES Stormwater Permit. Next session is noted on the Stormwater homepage.
Please Note: Beginning on May 1, 2010 the New York State Department of Environmental Conservation Construction Activity Permit, GP-0-10-001 requires all developers, contractors and subcontractors to identify at least one trained individual from their company who will be responsible for implementing the Stormwater Pollution Prevention Plan. The individuals responsible for installing, constructing, repairing, maintaining or inspecting erosion and sediment control measures or constructing post-construction stormwater management practices at SPDES-permitted construction sites are required to attend this course every three years.
If you are in need of a training go to please click here for a complete listing of available trainings in New York State.
The first Stormwater Contractor training in Erosion & Sediment Control sponsored by the Chemung County Soil & Water Conservation District and the Stormwater Coalition. Held Jan. 8, 2009 at the Big Flats Community Center.
SPDES Construction Stormwater Information
Construction Stormwater Links
Contractors, please click here for a checklist of construction site paperwork required by the General Permit to be available on site during normal business hours.
This page contains a host of tools and sources of technical information related to the General Permit for Construction Activities and useful for the design of stormwater management practices. It is primarily intended for consultants and other design professionals. However, it may also be helpful to local officials and others involved with stormwater management. You can also access the Draft MS4 Permit and Fact Sheet and the SPDES Draft Permit and Fact Sheet from this DEC link.
Click here to view the SPDES General Permit for Stormwater Discharges from Construction Activity Permit No. GP-0-10-001.
Forms for Stormwater Program
Forms Related to the SPDES General Permits for Stormwater Discharges and various stormwater programs may be accessed and downloaded from the DEC website.
Stormwater Pollution Prevention Plan (SWPPP)
A Stormwater Pollution Prevention Plan (SWPPP) is required when the project will impact, disturb or expose one or more acres of soil. The SWPPP Checklist will ensure the completeness of the SWPPP before submitting it with the Notice of Intent (NOI) to the municipality for review and acceptance.
The SWPPP Acceptance Form is used by each designated MS4 in Chemung County. The SWPPP Acceptance form must be signed by the Municipality before submitting the NOI & SWPPP to the New York State DEC in Albany.
Please check with the local Stormwater Officer in the municipality your project is located for more information on the SWPPP and NOI.